Showing posts with label finished_garments. Show all posts
Showing posts with label finished_garments. Show all posts

Sunday, April 6, 2014

The Scarlet Pants

This is the story of success and failure. After 1.5 years comes the first full project - The Perfect Pant #2, I will call them the Scarlet Pants.

For those who care: read about how this came to life in this morning post here.


Pattern: Self drafted "Perfect Pants" pattern

Size: approximately 36-38

Alterations:  I took on about 3cm in the original back seam to allow for the sway back, this realy messed up the whole thing and almost at the end I had to lower the front waistband by 2cm towards the centre front to achieve an even line and the fit I was happy with. The finished waistline is a bit low, but overall I am very happy with the style.

Fabric: Red Bi-stretch gabardine. Surprisingly well suited for tight pants. Did not expect.

Time to complete: About 8 hours in total including all re-makes and alterations.

Sewing Process and Challenges: It was a relatively easy project. The main challenge was fitting the pattern once again to my ever-changing body. I am a very lazy sewer and I don't have patience for muslins, so as a rule every projects hits the wall at some point ( usually when I stop to think how well it is going this time) and I discover a horrendous error, that could have been easily corrected have I made the muslin first and altered the pattern.) This time is was finishing the pants and trying not to see the gap at the back and weird pulling on the front- all corrected by ripping the front waistband off the pants and lowering it by 2 cm towards the center front. Stupid, unforgivable impatience...

Another disaster- the buttonholes. So bad- I am NOT even going to photograph them- I swore by snap fasteners before, why was I so arrogant. ( When I was a kid in Estonia, we had a lot of Atelier's, so all you have to do is mark the places, bring the garment to the workshop- and voila! you had super professional buttonholes, snaps, covered belts, etc. - whatever you wanted for a very reasonable fee. Sometimes, I really wish for a Time Machine!)


And one more small thing- I blogged in the last post about Sandra Betsina's Flat Fly Zipper tutorial. One correction- a great tutorial, but I think I still would like to cover the zip from the inside- it does not feel very nice, especially that mine is a metal zipper.

Overall, I would mark myself a B for these pants. Very wearable, but there is definitely room for perfection. But after a year and a half of NO sewing.... not bad!

©2014 copyright Sewing And Style.
All rights reserved.
All images and copied text must have a link back or reference to Sewing and Style Den

Monday, August 20, 2012

The making of a peplum top: pattern review

Pattern: Peplum top Burda 8/2012 113-114

Size: 34

Alterations: omitted the sleeves, finished armholes with bias stripes; added satin binding to the neckline instead of finishing with facing. Pattern correction - fitting the shoulder line.

Fabric: sheer crepe (I think) it is not too slippery, does not fray too much either and was easy to work with. I had about 1.2m 115cm wide originally, and there is still some (about a fat quarter) fabric left to be used as a nice detail somewhere.

Time to complete: about 4-5 hours from tracing the pattern to a finished garment

Sewing Process and Challenges: I found this pattern to be very easy to sew, the instructions were quite good and I had absolutely no issues during the process.

I liked the fact that inserting the invisible zip was suggested before sewing up the shoulder and side seams, it makes perfect sense and so much handier to do.

As my fabric was very light, I interfaced the centre back seams before sewing with a stay tape:


As the fabric doesn't really fray too much, I trimmed it to the edge of the interfacing tape:


 Then I sew the invisible zipper following a tutorial- Invisible zipper insertion from pattern~scissors~cloth


 The result is a very neat invisible zipper- and so easy. Is it even there?


after machine basting the shoulders and the sides, the first fitting was quite satisfactory, the only adjustment was lowering the shoulder line at the armholes. As I decided not to sew sleeves for this version, all I had to do is to pin the excess and sew a new seam accordingly:


Hemming this top was a dream- unlike chiffons and silks, this fabric was very easy to press and it was not slippery at all to sew. So I presses the hem allowance to the inside and ran a row of straight stitches a few millimeters from the edge.


Then I simply cut the allowance excess close to the hem:


I wanted to add something different to the top and when the white satin bias tape caught my eye, I knew this was the answer! To prepare the bias tape, i always stretch it with a hot steamy iron. ( A handy tip is to pin the edge of the tape to the ironing board cover…


 and then pull the tape and stretch it to the maximum, running a steamy iron over it (see how much more narrow it becomes? I also press a curve into it, to help hold the curvy shape:


 I loved the contract between the main fabric and the white satin:


I then stay stitched the collar and armholes and then applied the bias tape to the neckline. At first, i wanted to decorate the armholes the same way too, but later i decided that less is definitely more in this case and simply used bias stripes of the main fabric to finish the sleeves.


The result is my new top: I love it paired with narrow trousers and very very very high heels!
 For larger images, please read my previous post: I'm Back On Track 






©2012 copyright Sewing And Style.
All rights reserved.
All images and copied text must have a link back or reference to Sewing and Style Den

Saturday, August 18, 2012

I am back on track!

It has finally happened- I am sewing again!!!!!!

Firstly, I would like to thank everyone who were so supportive helping me get through the dry spell in sewing. Thank you! And- it worked in the most unexpected way.


Oonabaloona advised me to cut my favourite fabric, and so I did. Here it is, a sheer crepe with a light velvety animal print. I have to admit, I was terrified to cut this piece for ages, two years to be exact. I was afraid it will be a nightmare to work with and also was not sure of the best pattern. 


20 seconds of extreme insanity and I decided to make a so-often-mentioned-on-this-blog peplum top. My first attempt (THAT self-drafted pattern) was disappointing, and I was seriously considering ditching the whole idea, but I love this trend, and it would kill me not to try once more!

August Burda style magazine was staring at me for days, with a lovely yellow peplum top on the cover.  And it won, I traced the pattern and cut the fabric. Two weeks later, I got up early and locked myself in my workshop- and voila!!!! 

I cut size 34, omitted the sleeves and added a satin binding around the neckline- very cute detail, I think. The pattern was extremely easy to use, and I am quite happy with the shape. 

pardon the visible bra- it is supposed to be nude, but I have been tanning like crasy recently, so it looks very pale on me! LOL!


 It looks very retro at the back too- I am loving the shape, what do you call that in English again? Like something from the early 20th century… I think.



Read the full review post here  (with a few behind the scenes photos) ! 



©2012 copyright Sewing And Style.
All rights reserved.
All images and copied text must have a link back or reference to Sewing and Style Den

Wednesday, June 27, 2012

Shorts? Shorts!


Have I mentioned how delighted I am with my Perfect Pants pattern? Oh yes, only but a hundred times already! LOL! However, talking is not good enough- I have put it to use once again and this time, getting ready to our (motor) biking trip in Mallorca, I now own a pair of denim shorts too. 


Those who follow my blog from the start might remember me contemplating the whole idea of shorts on a pear shaped body, but these do look ok. But I am not planning on making and wearing more shorts - not the most flattering bottom garment of all. One pair will do.

A quick word about the pattern. Obviously, every fabric will behave somewhat differently in the same pattern. I realized that the previous pair of trousers were quite snug and made sure the fabric I was using for my biking shorts had a good bit of stretch in it. 

It started with a drama though, as I simply forgot if I have added seam allowances to the paper pattern last time. And it was crucial with such a tight fit, so I truly panicked. However, after double checking with the Perfect Pants it seemed to have no allowance and I moved on, hoping this was not the sign of things to come. 




Although I am extremely happy how the first pair came out, there still a few things that need to be adjusted on the pattern, and making these shorts really highlighted the need for it. I am talking about my seriously  swayed back. There is a very prominent dip between the waist and the buttocks and all my trousers always stick out at the top back there. 

This pattern features a wide yoke, which I had made out of 2 pieces at the back, rather than a whole, hoping to eliminate the gaping. But I don't think it solved the problem much, as the yoke looks a bit V-shaped at the center back seam and then the top edge of the trousers (or shorts in this case) looks wrong.  I am wondering if cutting the back yoke as a whole piece on a bias could make a difference? Anyone?

Usually, I do a good bit of research beforehand, but this time, the issue came up in the middle of sewing, and  (I admit) it was due to a simple case of laziness on my behalf, that I didn't re-draft the yoke pattern piece. I just added a narrow belt on the top, and it worked for this one. But I am definitely going back to my virtual drawing board to address the sway back issue before using the pattern next time. Would any of my readers have a good advice or a tutorial that might help? Please post it here in the comments, it will be so appreciated. 

The look of the shorts turned out to be very retro- completely unintentionally, as normally I don't sew retro pieces. but I love it, it is very sixties- hence the style of the photos, the real colour is quite vivid blue, I also love my cute anchor button (close-up photo on top).

So far so good, I am delighted with the shorts,  as I said earlier, one pair will do-  and it will do quite nicely!

And just to remind everyone, that June Giveaway is about to end in a few days, so do enter now!





©2012 copyright Sewing And Style.
All rights reserved.

All images and copied text must have a link back or reference to Sewing and Style Den

Monday, June 25, 2012

Best of 2012, part 1


June is coming to end and here is a chance to reflect on the first half of sewing in 2012.

I think I could have done a bit more, perhaps. But I was really distracted by a massive research into downloadable pattern production and some baby steps of my own in that direction.

I am surely not the only one that could admit that more than half of clothes sewn end up hardly ever worn, if ever worn at all. Today I went through my wardrobe again and realized that so far 2012 hasn't been too disappointing.



There were a few really nice items, here are my absolute favourites, that are definitely being used more than often (in no particular order):







The Gwyneth Skirt (not to forget the free PDF pattern)







and, of course, my perfect pants, although the newest addition, they are definitely worth including!
So far so good, and  it seems to turn into a wonderful 2012 collection-thanks to my new camera ;)

Hope you like my choice!



©2012 copyright Sewing And Style.
All rights reserved.
All images and copied text must have a link back or reference to Sewing and Style Den

Wednesday, June 20, 2012

Burgundy Dream


A few month ago I finally got around to use my burgundy chiffon and the choice fell on Burda Style's top 119 from 2/2008 issue - simple, soft and very very feminine. I feel this top was a little under- showcased then, so I am re-posting this with updated photos.


The process of making it proved to be an absolute nightmare! Chiffon is so slippery and it takes twice longer to pin it and so many seams required more attention: all seam are tidied using french seam techniques, the armholes and the hem are folded back, ironed, lace trimming applied and the excess fabric cut off.

Here is a challenge again, this slippery b***ch of a front piece fabric got under the scisssors when I was cutting off along the front hem, so I ended up with  a slit just under the trimming.... Oh well, gladly, I had a lot of that lace left over so I just applied a second layer and it looks even better.

The collar resembles a scarf and is held by the loop in one of its sides. 



 I am delighted with the result! I have to say- some time ago I decided that this is simply not my colour, and this fabric was destined to end up in a bin, or at the very best as a lining to something else. Now I am very happy with my decision to use it- I think it came out super cute! Don't you?

However, I am not claiming the win of the chiffon battle, I think I actually will avoid it in future, if I can...

Monday, June 18, 2012

Perfect Pants Odyssey

This is a story of ups and downs, obstacles and fast tracks, creation and destruction. 

A few weeks back I have blogged about my interest in pattern drafting software and a little about pattern drafting methods, particularly Il Modellismo- Italian style.  I also talked about numerous options of using CAD software in place of traditional pencil and paper combo. 


My drafting journey started with drafting a pattern of a simple pencil skirt, which is the easiest of all garments, and it was indeed very easy-  after the muslin was done, it fit perfectly, but I decided to leave using the pattern for the future project as there was no need for another skirt for me at the time. So I moved on to the more challenging part- drafting trousers. 


The most valuable lesson I learned is that pattern drafting is not the perfect solution for great looking garments. It is a hard enough process of trials and failings,  frustrating at times. And although it is very rewarding when the best result is achieved, it does take serious commitment, and can be exhausting too. 

The main reason is quite obvious- every human's body is unique and it requires taking all measurements meticulously and accounting for every bump and curve when drafting: the depth and width of darts, for instance cannot really be predicted by a formula if the body shape is very different from standard. I, for instance, never even suspected that I do have a protruding tummy until I had to deal with designing the crotch. And that made an impact on the width of the darts in the front too - using the suggested instructions simply didn't work. 


Overall, my journey consisted of around 10 drafts. I used my CAD program for drafting, but I resorted on the old pencil to mark the needed adjustments on the current draft. I then transferred the adjustments onto the virtual draft and printed it again. One could argue that all this printing out A4, sticking it together and cutting out business is a waste of time, you could draft everything on paper in half the time. Yes, I agree, but to start with I have no paper large enough for drafting, and secondly I learned a little trick how to compile A4's into a pattern sheet in a very little time, I will post a tutorial a tutorial on this sometime soon. So it was good enough for me.




sloper number 1

My first sloper was very loose, I was looking for something much more contemporary looking than that, so I tried to create something more tight, which resulted in the following, quite strange looking sloper. I called it: "a message to J-Lo".  Impressive waist-hips ratio, huh? And there it is- my protruding tum too. 
A message to J-Lo - sloper number 2

I was lucky- I had some help from my fellow seamstresses, who was able to analyse the photos and give me lots of valuable advice me along the way. Here is an example of such help I got:


Julia's (Sewing Galaxy) suggestions regarding the first sloper

However I stopped posting photos after the second one as I was getting to understand the basics and looking at other people's slopers too. I took pictures and was able to analyse them myself too.


One very important tip I took on board is pinning technique. Basically you wear the garment( sloper) inside out and pin it into the best possible fit. There is a great series of books I found out about called "for real people" - where this method is wisely applied. And it is about commercial patterns too.  I got my hands on Pants for Real People , that a friend of mine was able to lend me for a bit, and I am sure it made a massive difference to my project.


One draft after the other, the better fit was achieved and the mistakes (mostly) eliminated (I hope). So when the sloper looked very acceptable, it was the time to put it all to work for real!

And here they are- my perfect pants. Yes, I am not afraid of the "P" word- according to my husband, they are the best pair I have ever owned, and I value his opinion a lot. 

I lowered the waist line quite a bit and added a wide yoke, just above the hips to try and not look like J-lo in the bum department as little as possible. The wide yoke really makes a difference- I believe it looks very flattering. 

There are a few elements I would love to expand on, for example the zipper insertion technique, but I think I will keep it for another post, and as I am planning to use this pattern in future, the photo tutorial mightbe a better idea.


I used just over 1.20m of Stretch Gabardine Manci bought at myfabrics.co.uk - my favourite fabric site for online shopping.   The yoke is faced by simple polyester lining, which I cut along the grain- great tip for those cheap lining fabrics that break easily along the seams in no time. It worked well- I had no issues with my seams this time. The front features 4 shank navy buttons with silver braiding, however, they are only decoration as I used snaps underneath instead. I don't like the buttonholes my sewing machine produces, so I wanted to find an alternative and it worked!


back view

Overall the weeks spent sweating over the pants patterns paid off, I have a great one to use for most my future tight pants- perfect fit guaranteed! I just need to come up with a good name for it!










©2012 copyright Sewing And Style.
All rights reserved.
All images and copied text must have a link back or reference to Sewing and Style Den

Wednesday, May 30, 2012

Emerald Dragon Dress


Between making a dress from a piece of fabric and a pattern and re-making a RTW one, what would you chose? My answer comes without any hesitation. No, I don't need to think about it! I absolutely hate re-making RTW clothes. Unless the garment you have was made for a whale and you can place your pattern pieces on large cuts of fabrics, re-styling just doesn't work for me. What is does is frustrate, annoy and disappoint me.

I love the comfort of following the pattern piece line, transferring the chalk line to the fabric, knowing it is likely to guide me to a beautiful result! And that is why I am really determined to create sets of made to measure sloper patterns to use for those I sew for. 

Chantelle went to a local Special K Charity Dress sale, here in Gorey last Saturday and picked and bought herself her first ever dress.  I wasn't even around to influence anything. (sigh…) She is almost 12 and she is becoming a woman, my little baby.
before
So back to the dress: classic chinese traditional cheongsam dress in a beautiful emerald brocade with golden dragons. Dragons are very special subjects for me and her: not only we both were born in the year of a Dragon, but also due to Chantelle's never ending obsessions with dragons, dinosaurs and all similar creatures.  She draws them, she writes short stories about them, she now wants to wear them.


A little hiccup- the dress was VERY big- XXXL, even for asian standards it is a large size. Both of us are size 8 (UK), so we had to re-make it to smaller size. It also had a little stain on the left of the chest, so if I wanted to keep that beautiful traditional fastening and a collar, I had to turn the top part of the dress into a yoke. So I ripped all the nessesary seams- sleeves, sides, darts- pressed everything and cut the dress over the bust line in a slighly curved shape in the front and straight accross under the shoulder blades at the back.



There is a beautiful piping along all hems, so I just measured the wanted length of the bottom pieces and cut them, leaving the back slightly longer than the front.


I added two darts in the front and two knife pleats are running about 30cm down from the yoke at the back, taking in some of the fullness of the fabric.
Personally I love more fitted look, but Chantelle insisted on the straight colomn-ish shape, as she thought it looks more traditional, so I just didn't argue.



As there was no pattern, I cut the armhole approximately where it should be. Note for the future- get your sloper patterns done for those kind of alterations- it would have saved me so much grief. I used the longest stitch on my machine to baste the sleeves in and then pinned them in place, where they seemed to belong, slightly pressing the edges. This served me as a guide to set the sleeves a little better. Yet I still would have taken a pattern to use- it could save me the frustration!




Chantele is very happy, although, using the words of the man of the house, "in this country, you can only wear it while serving food in a chinese restaurant" LOL He is kind of right, nobody wears things like that over here, general dress sence is not very versatile, unfortunately... Too bad though, because it really looks cute on her, maybe she should wear it for her birthday- she is 12 and it is the year of a DRAGON after all!



©2012 copyright Sewing And Style.
All rights reserved.
All images and copied text must have a link back or reference to Sewing and Style Den

Sunday, May 13, 2012

Me-Made-May 2012: week 2 roundup


So here is another Me-Made-May 2012 week and I am back with a little summary. The highlight of this week for me, was that while very busy in work, I squeezed in a little alteration to my Twisted Skirt- I felt it was sitting too low, so I simply took the excess width around the yoke into small symmetric pleats, two at the front and two at the back- each about 1cm deep. This brought the skirt up to my natural waist, and took the twisted part up from my thighs, which are the widest part of my pair shaped body, therefore making the skirt shape closer to A-line, it does look quite flattering, and super cute! 

So I am delighted as so far I had only worn this skirt once ;) so I made sure it gets around a lot this past week.

And here is my report:

Monday,      May 7th - Up in The Air Coat
Tuesday ,     May 8th - Twisted skirt
Thursday,   May 10th - Winter Mood Cardigan, Twisted skirt
Friday,       May 11th - Twisted skirt
Saturday,   May 12th - Rushed up sleeves Top
Sunday,     May 13th-Twisted skirt


Twisted Skirt




©2012 copyright Sewing And Style.
All rights reserved.
All images and copied text must have a link back or reference to Sewing and Style Den

Disqus for Sewing and Style Den